Tel：0512-65685025
Fax：0512-65650370
Email：sales@hanke-nmc.com
Website：http://www.hanke-nmc.com
Add: Block 7, No.19, Xingnan Road, Wuzhong, Suzhou City, Jiangsu, China
Name：Rebecca Dong
|
|
Technical |
|
 |
Plastic material processing injection needs to start from the temperature. |
A lot of plastic material is transparent plastic, made of these materials is very aesthetic, some home appliances, digital shell like to use these materials, can not only highlight the grade of the product itself, the cost of production is also ok. However, the transparent plastic is very troublesome in the injection molding process, especially in the injection molding step, the temperature is not good enough to fill the mold completely.
Why does transparent plastic work from the temperature? It turns out that the viscosity of the transparent plastic processed into liquid when it is very big, poor liquidity, when the viscosity, it is easy to stick to pay does not flow in the mold surface, cause mould cannot be filled completely, so certainly not complete after plastic molding. Therefore, when filling the transparent raw material into the mold, it should have a strong impulse, the temperature should be followed, and the injection temperature can improve its fluidity, so that the liquid can have a strong impact.
If you want to control the injection problem, you need to be skilled in the technology of the staff. You know very well about the transparent plastic. If you can't do well in this step, the next few steps will be equal to white. Therefore, it is necessary to do well in the injection molding step, the staff should keep in mind.
|
Down：Six ways to improve the service life of stamping die.
Up：Ten questions to be paid attention to in injection molding. |
| 【Back】 |
|
|
